BLE Capture the Flag: A Bluetooth low energy capture the flag

BLE Capture the Flag

The purpose of BLE CTF is to teach the core concepts of Bluetooth Low Energy client and server interactions. While it has also been built to be fun, it was built with the intent to teach and reinforce core concepts that are needed to plunge into the world of Bluetooth hacking. After completing this CTF, you should have everything you need to start fiddling with any BLE GATT device you can find.

Flags

How to Submit Flags

Before you can submit flags, you have to discover the Bluetooth MAC address of your device. Here are a couple of example commands to help you find your device:

Discover MAC using hcitool:
sudo hcitool blescan

Discover MAC using bleah:
sudo bleah

Now that you have found your device’s MAC address, you can now communicate with it. Before we get started with flags, let’s check out how we can see our current score. In order to see where you are in the CTF, you can read from handle 42 on the device to see how many flags you have. The following are example commands of how to view your current score. Make sure you replace the MAC address in the example commands with the MAC address of your device.

Show score with gatttool:
gatttool -b de:ad:be:ef:be:f1 –char-read -a 0x002a|awk -F’:’ ‘{print $2}’|tr -d ‘ ‘|xxd -r -p;printf ‘\n’

Show score with bleah:
sudo bleah -b “30:ae:a4:20:79:da” -e

Ok, ok, ok, on to the flags! All flags are md5 sums truncated to 20 characters to avoid MTU limits by some hardware. They can be submitted to the gatt server on handle 44. The following are examples of how to submit a flag. Make sure you replace the MAC address in the example commands with the MAC address of your device:

Submit using gatttool:
gatttool -b de:ad:be:ef:be:f1 –char-write-req -a 0x002c -n $(echo -n “some flag value”|xxd -ps)

Submit using bleah:
sudo bleah -b “30:ae:a4:20:79:da” -n 0x002c -d “some flag value”

Flag Hints

Setup