TL;DR
Zenitel fixed 11 security flaws on November 13, 2026, in its IP intercom firmware and the Zenitel Connect server. The most severe of these Zenitel vulnerabilities, CVE-2026-95377, scores 9.4. It lets an attacker on the same network segment run commands as root on intercom devices, with no credentials.
Three bugs hit VSFF6, VSFF8, VSFF8MP, VSFF8MN and VSFT intercom firmware, and eight hit Zenitel Connect. Chained together, three Connect flaws give any logged-in user root on the server. Zenitel says it “is not aware of any exploitation of these vulnerabilities.”
- Total: 11 CVEs
- Severity: 2 Critical · 4 High · 5 Medium
- Actively exploited: None confirmed
- Highest severity: 9.4 (Critical · CVSSv4) — CVE-2026-95377
- Action: Apply the latest security updates now
Notable CVEs
| CVE | CVSS (CVSSv4) | Type | Fixed in | Status |
|---|---|---|---|---|
| CVE-2026-95377 | 9.4 | OS command injection via DHCP option 66 in EdgeAudioClient TFTP provisioning | 9.6.3.0, 10.1.3.0 | Not exploited |
| CVE-2026-95614 | 9.3 | host applies rsyslog configuration written to a volume shared with the hiatus container | 1.11.0 | Not exploited |
| CVE-2026-95615 | 8.7 | OS command injection in hiatus container via unsanitized filename in audio messages API | 1.11.0 | Not exploited |
| CVE-2026-95378 | 8.6 | Path traversal in turbineweb certificate upload allows arbitrary file write as root | 10.1.3.0 | Not exploited |
| CVE-2026-95613 | 8.6 | pREST API adopts arbitrary PostgreSQL role from unvalidated JWT sub claim | 1.11.0 | Not exploited |
| CVE-2026-95379 | 7 | Path traversal in turbineweb certificate delete RPC allows arbitrary file deletion as root | 10.1.3.0 | Not exploited |
| CVE-2026-105623 | 6.9 | web interface serves production JavaScript source maps without authentication | 1.11.0 | Not exploited |
| CVE-2026-105624 | 6.9 | login allows account-lockout denial of service | 1.11.0 | Not exploited |
Why It Matters
These Zenitel vulnerabilities reach beyond the devices themselves. According to the Zenitel security advisory, a rooted intercom gives an attacker “a position from which to attack other systems on the network.”
The worst device bug also affects the default setup. Devices that use DHCP, the factory default, are exposed “on every boot and lease renewal.”
How the Attack Works
Intercom Firmware
CVE-2026-95377 sits in the device’s TFTP provisioning module. A rogue DHCP server on the same segment can send a crafted TFTP server name. Then the device passes that value “to a shell without sanitization,” and the injected command runs as root.
Two other device bugs affect only 10.x firmware from 10.0.3.0. Both are path traversal flaws in certificate handling. With administrator credentials, an attacker can write or delete any file as root.
Zenitel Connect Chain
The Connect server bugs work as a chain. First, CVE-2026-95615 lets any authenticated user, even at the lowest privilege level, inject commands into an application container. Next, CVE-2026-95614 lets that foothold escape to the host as root. Finally, CVE-2026-95613 grants database superuser access, including the master encryption key and password hashes.
Zenitel sums up the result: “an attacker with any valid Zenitel Connect account and network access to the server can obtain root access to the server’s host operating system.”
The remaining five Zenitel vulnerabilities are milder. They cover public source maps, account lockout abuse and username enumeration. Others allow unlimited password guessing on an unused login path, or phishing through an unsandboxed frame.
Affected Versions
- VSFF6, VSFF8, VSFF8MP, VSFF8MN and VSFT firmware before 9.6.3.0
- The same devices on 10.x firmware before 10.1.3.0
- Zenitel Connect before 1.11.0
Patch and Mitigation
Upgrade devices to 9.6.3.0 or 10.1.3.0, and Zenitel Connect to 1.11.0. Zenitel says the Connect fixes “should be installed as a single upgrade.”
If you cannot patch devices right away, switch them to a static IP address. Alternatively, enable DHCP snooping on the access switches. For Connect servers, limit web and API access to trusted management networks and enforce strong, unique passwords.
Zenitel also urges customers to replace the factory self-signed certificate on the Connect admin interface. The update does not change that certificate.
Support Our Threat Intelligence
Find our vulnerability reports and weekly recaps helpful? Support our work today and unlock a 100% ad-free reading experience!